Home > News > Content

Easy Operation Of Molding Machine

The forming machine is also known as the Open box machine, which automatically completes the opening, forming and bottom folding. And now complete the next part of the tape paste, will be folded into cardboard box open, the bottom of the box according to a certain procedure, Forming Machine and tape sealed after transmission to the special equipment for the packing machine. Automatic carton forming machine, automatic Open box machine is a large number of carton automatic Open box, automatic replacement cover, automatic sealing under the bottom of the duct tape equipment, the machine all use PLC display control, greatly convenient operation, Forming Machine is an automatic scale production essential equipment. The working principle of the molding machine is similar to that of syringes, it is the push of the screw (or plunger), the plastic injection of the melted state (that is, the viscous flow state) into the closed mold cavity, the process of obtaining the products after solidification and shaping. Forming Machine Injection molding is a cycle of the process, each cycle mainly include: quantitative feeding-melt plasticizing-pressure injection-mold cooling-starting die pickup.

Molding machine Features

(1) Molding machine computer using imported PLC computer host chip, matching LCD display, software standby fault self-diagnosis system and error correction function, make the operation more convenient, Forming Machine its control program with a fool-style design, without professional training can be on the operation.

(2) The full hydraulic drive of the forming machine has the first STEPLESS Hydraulic FM technology in China, which solves the adaptability of the molding machine to various materials and block types, improves the compactness of the material and shortens the forming period.

How to use the molding machine

1, choose the Flat table, stabilize the machine, you can open the chassis feet to make the machine panel easy to observe.

2. Insert the plug on the hand-held sensor head into the socket on the panel and tighten it. Forming Machine Attention to the location gap ·

3. Plug one end of the power cord into the socket on the back panel of the chassis, and the other end into the power supply socket, make sure to use single-phase three-wire power supply.

4, open the chassis back panel on the "Total Power switch", press the Panel "power Switch (switching)" key, to "prepare (WARM up)" Green LED light, the machine can work.

5, press and hold the "Set button (SETTING button)" Key, set to the appropriate value, generally in 0.5-2 seconds.

6, put the sensor head on top of the container, Forming Machine press the Start button on the handle, then "heating (heating)" Red LED light, indicate is heating, the induction head does not remove, "heating (heating)" Red led off and then remove the sensor head, etc. "Ready (WARM up)" Green indicator light or the inside of the buzzer short sound "beep" prompts can also be the next container sealing operations.

7, check the quality of sealing, according to different materials, Forming Machine diameter of the container and production efficiency, appropriate trimming "set button (SETTING button) key, making the best sealing quality.